Cable Assemblies

Current Stock:

Cable Assemblies

Constructed of 1/8" and/or 3/16" stainless steel aircraft cable incorporating a stainless steel swivel to minimize he effect of unraveling due to the rotation of the truck assembly. The upper cable section is supplies with a stainless steel thimble, 2 copper crimps, and two ball cable stops, however, because this section must be threaded through the truck assembly, these parts are not attached to the cable before shipment and must be attached in the field using a crimping tool. These standard cable assemblies are designed for flagpoles with a winch installed at 4' above grade.

Exposed HT.

of Flagpole

 Lower Inside Cable Upper Outside Cable 
Dia. Len. Dia. Len.
20' 3/32" 20' 1/8" 20'
25' * 3/32" 25' 1/8" 25'
25' 1/8" 25' 1/8" 25'
30' * 3/32" 30' 1/8" 30'
30' 1/8" 30' 1/8" 30'
35' * 3/32" 35' 1/8" 35'
35'  1/8" 35'  1/8"  35' 
40'  1/8"  40'  3/16" 40 
45'  1/8"  45'  3/16"  45' 
50'  1/8"  50'  3/16"  50' 
60'  1/8"  60' 3/16"  60' 
70'  1/8"  70' 3/16"  70' 
78'  1/8"  78' 3/16"  78' 
80'  1/8"  80'  3/16"  80' 
90'  1/8"   90' 3/16"  90' 
100'  1/8"  100'  3/16"  100' 
110'  1/8"  110'  3/16"  110' 
120'  1/8"  120'  3/16"  120' 
130'  1/8"  130'  3/16"  130' 
140'  1/8"  140'  3/16"  140' 
150'  1/8"  150'  3/16"  150' 
160'  1/8"  160'  3/16"  160' 
170'  1/8"  170'  3/16"  170' 
180'  1/8"  180'  3/16"  180' 
190'  1/8"  190'  3/16"  190' 
200'  1/8"  200'  3/16"  200' 

*To be used with 5" diameter poles with our M-5 Winch installed.